Search the Dell Virtual Rack System

Simple, reliable archive and backup at minimal cost

TL1000 tape autoloader with LTO SAS tape drive support

Automate backups and save time with an affordable, high-density tape autoloader featuring a compact 1U design and remote management

Close

TL1000 tape autoloader with LTO 6Gb SAS tape drive support

With remote management via a Web-based browser, fast installation, and time-saving automation, the TL1000 autoloader is an ideal choice to simplify large or frequent archive or backup jobs.

  • Back up more data in less space with up to 54TB native capacity (nine LTO-7 cartridges) in a compact 1U chassis
  • Efficiently add or remove cartridges with the removable tape magazine and support continuous operation when inserting or removing cartridges with the I/O station
  • Purchase of a library-managed encryption enabled TL1000 with LTO-6 or LTO-7 drives at point-of-sale supports privacy and regulatory compliance for your data using centralized encryption key management (feature activation after point-of-sale not supported)
  • Support for Linear Tape File System Library Edition (LTFS LE)
  • Minimize acquisition expenses with cost-effective hardware, media, and software
  • Ensure long-term value with LTO media, providing forward compatibility to help protect your investment
  • Support for Linear Tape File System Library Edition (LTFS LE)
Tech Specs
Feature Description
Tape backup software Dell NetVault Backup
Encryption support AES-256 hardware encryption engine
WORM capability Support for Write-Once-Read-Many media
6Gbps SAS 6Gbps SAS connectivity
LTO-7 tape 300MB/s native, 6TB native capacity, support for up to 2.5:1 compression
LTO-6 tape 160MB/s native, 2.5TB native capacity, support for up to 2.5:1 compression
LTO-5 tape 140MB/s native, 1.5TB native capacity, support for up to 2:1 compression
LTO-4 tape 120MB/s native, 800GB native capacity, support for up to 2:1 compression
TL1000 tape library specifications

Tape backup technology

LTO specifications are an open format designed for interoperability
Investment protection is assured through backwards compatibility
• Each LTO generation reads 2 generations back
• Each LTO generation writes 1 generation back
Linear Tape File System (LTFS) support provides easy data access and management allowing easy file share; LTFS-LE software is available for purchase

Library configurations

Rack mount standard

Barcode reader

Standard

Encryption

Library-managed encryption is only available on LTO-6 and later generation TL1000 tape libraries.
Library-managed encryption enabled PowerVault TL1000 tape libraries can be purchased at point-of-sale only. Library-managed encryption cannot be enabled on existing TL1000 tape libraries and the feature cannot be purchased after point-of-sale.

Network interface

ADI T-10
Ethernet RJ-45
Serial RJ-11
IPv6 Phase 1 & 2 Ready and DoD APL

User interface

Operator Control Panel
Located on the front of the TL1000 tape library. Use the LCD panel to check system status, run diagnostics, check and set configurations, verify drive operations, run an inventory and manage the system.
Remote Web Management (RMU)
Access the web-based administration through a 10/100 BASE-T connection and any standard web browser. Use RMU to check system status, run diagnostics, view system logs, check and set configurations, verify drive operations, run an inventory, manage the system and upgrade drive and library firmware.

Code updates

RMU or host bust for drives
RMU only for library code updates

Expansion capability

Ships standard with 9 cartridge magazine

Chassis

1U form factor
Height: 44 mm (1.73 in)
Width (chassis/bezel): 445 mm (17.52 in)/483 mm (19.02 in)
Length: 850 mm (33.46 in)
Weight: 13 kg (28.66 lb)
Orientation: Horizontal only

Environmental operating conditions

Temperature: 50 to 95 degrees F, 10 to 35 degrees C
Humidity: 20% to 80% RH (non-condensing)

Power

Electrical power: 1.3A at 100 VAC, 0.7A at 240 VAC
AC power voltage: 100-127 VAC; 200-240 VAC (4-2 A)
Line frequency: 50-60 Hz

Close

PowerEdge server (R530)

Affordable, virtualization-ready, 2-socket rack server

Close

PowerEdge R530

  • Accelerate performance across a wide range of workloads with the latest Intel® Xeon® E5-2600 v4 processors
  • Drive greater memory performance with 12 DIMM slots and DDR4 memory
  • Boost I/O performance with 5 x PCIe slots including 3 PCIe 3.0 slots driving 2x data throughput compared to PCIe 2.0
  • Accelerate time to production and drive better ROI by automating deployment with iDRAC8 with Lifecycle Controller
  • Control energy budgets with highly energy-efficient processors, memory, power supplies; Fresh Air 2.0 capable
  • Easily accommodate data growth with support for up to 8 x 3.5” HDD
  • Select from a range of RAID options for data protection and optimized performance
  • Adapt flexibly to changing workload conditions with an expandable platform ready for virtualization and HA clustering

small-Intel-Xeon-logo-e1442270250630

Tech Specs
Feature Description
Form factor 2U rack server
Processor Intel® Xeon® processor E5-2600 v4 product family
Memory DDR4 DIMMs at up to 2400MT/s; 12 DIMM slots: 4GB/6GB/16GB/32GB
I/O slots Support for up to 5 x PCIe: 3 x PCIe 3.0; 2 x PCIe 2.0
Network controller 4 x 1GbE
FeaturePowerEdge R530 technical specification

Form factor

2U rack server

Processor

Intel® Xeon® processor E5-2600 v4 product family
Processor sockets: 2
Chipset: C610
Internal interconnect: up to 9.6GT/s
Cache: 2.5MB per core; core options: 4, 6, 8, 10, 12, 14, 16, 18

Memory

DDR4 DIMMs at up to 2400MT/s; 12 DIMM slots: 4GB/6GB/16GB/32GB

I/O slots

Support for up to 5 x PCIe: 3 x PCIe 3.0; 2 x PCIe 2.0

Storage

Up to 8 x 3.5” SAS, SATA, nearline SAS, SSD drives

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Network controller

4 x 1GbE

Communications

4 x 1GbE LOM
See http://configure.us.dell.com/dellstore/config.aspx?oc=pe_r530_1451&model_id=poweredge-r530&c=us&l=en&s=bsd&cs=04 for R530 supported network interface cards (NICs) and host bus adapters (HBAs)

Power supplies

495W, 750W, 1100W hot-plug PSU; -48V DC 1100W hot-plug PSU; 450W cabled PSU

Systems management

"Systems management: IPMI 2.0 compliant; Dell OpenManage Essentials; Dell OpenManage Mobile; Dell OpenManage Power Center

Operating systems

Microsoft® Windows Server® 2008 R2
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
VMware® ESX®
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™
Microsoft Windows Server 2012, includes Hyper-V

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm

Close

Would You Like More Information?

Click the envelope icon at any time to use our contact form to have a Dell EMC representative get in touch with you, or click Contact Me now.

Contact Me No Thanks