Search the Dell Virtual Rack System

Windows NAS appliances

NX430

Network-attached storage offers automated setup and data management for efficient data sharing

Close

NX430

  • Windows NAS appliances
  • Automated setup and management capabilities
  • Manages both file and block data for adaptable data sharing
  • Cluster-ready high availability failover storage solution

small-Intel-Xeon-logo-e1442270250630

Tech Specs
Feature Description
Storage 4 x 3.5" 7.2K SATA or NL-SAS
Maximum internal capacity 40TB raw capacity with 10TB drives
Types of data File and block (Microsoft iSCSI target)
Product configurationsNX430NX3230NX3330

Storage

4 x 3.5” internal drives that must be identical in capacity and type (NL-SAS or SATA)

Up to 12 x 3.5” drives

Up to 4 x 2.5” SAS drives

Maximum internal capacity

40TB raw capacity with 10TB NL-SAS drives

120TB raw capacity using 10TB drives

Leverages shared storage arrays attached via SAS, iSCSI or FC

Types of data

File and Block (Microsoft iSCSI target)

File and Block (Microsoft iSCSI target)

File and Block

Drive capacities

SATA (7.2K): 1TB, 2TB, 4TB, 6TB, 8TB
NL-SAS (7.2K): 1TB, 2TB, 3TB, 4TB, 6TB, 8TB, 10TB

SATA (7.2K): 2TB, 4TB
NL-SAS (7.2K): 1TB, 2TB, 4TB, 6TB, 8TB, 10TB
SAS (10K): 600GB, 1.2TB
SAS (15K): 600GB

Leverages shared storage arrays attached via SAS, iSCSI or FC

External expansion

PowerVault MD RBODs and MD JBODs (JBODs require PERC or OS level RAID)

PowerVault, EqualLogic and Compellent controllers and arrays

Gateway to PowerVault MD3, EqualLogic or Compellent

Form factor

1U rack mount system

2U rack mount system

1U rack mount system

Processor

Intel® Xeon® processor E3-1220 v5

Intel Xeon E5-2609 v3 1.9GHz, 15M Cache, 85W or Intel Xeon E5-2630 v3 2.4GHz, 20M Cache, 85W

Intel Xeon E5-2609 v3 1.9GHz, 15M Cache, 85W or Intel Xeon E5-2630 v3 2.4GHz, 20M Cache, 85W

File access protocols

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

Block access protocols

Microsoft iSCSI target

Microsoft iSCSI target

Leverages shared storage back end for block access or Microsoft iSCSI Target

OS supported

Microsoft Windows Storage Server 2016 (Standard and Workgroup Editions)

Microsoft Windows Storage Server 2016 (Standard Edition)

Microsoft Windows Storage Server 2016 (Standard Edition)

Standard RAID options

RAID 5

OS HDDs (on rear 2.5” HDDs) are always RAID1. Data HDDs can be configured from factory in RAID5 or RAID6 (minimum 4 HDDs). The internal PERC can support additional customer configurable RAID options.

2 HDDs for OS (RAID 1) or 4 HDD for OS (RAID 5) with PERC H310

Custom RAID options

0, 1, 5, 6 and 10 with the PowerEdge Raid Controller (PERC) H730

As supported by internal PERC H730 (RAID 0, 1, 5, 6, 10, 50, 60)

n/a

RAID controller

PERC H730 (internal drives) or H830 (optional for external drives)

PERC H730 (internal HDDs)

PERC H330

AC power/maximum current

Redundant, 350W

Redundant and non-redundant hot-plug 750W and 1100W PSU options

Redundant and non-redundant hot-plug 750W PSU options

Dimensions

Height: 4.28 cm (1.68 in)
Width: 48.2 cm (19.98 in)
Depth with rack latches: 48.24 cm (18.99 in); depth without rack latches: 43.4 cm (17.08 in)
Max weight: 13.8 kg (30.42 lb)

Height: 8.73 cm (3.44 in)
Width: 44.40 cm (17.49 in)
Depth (excludes bezel): 68.40 cm (26.92 in)
Max weight: 27.6kg (60.84lb)

Height: 4.28 cm (1.68 in)
Width: 48.2 cm (19.98 in)
Depth (excludes bezel): 70.05 cm (27.57 in)
Max weight: 16.9kg (37lbs)

Availability

Hot-plug hard drives, hot-plug power

Hot-plug hard drives, hot-plug redundant power, hot-plug redundant cooling ECC memory

Hot-plug hard drives, hot-plug redundant power, hot-plug redundant cooling ECC memory

Cluster support

Not recommended

No

Yes, up to 64 nodes

Rack support

ReadyRails™ sliding rails with optional cable management arm for 4-post racks (optional adapter brackets required for threaded hole racks)

ReadyRails II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional toolless cable management arm

ReadyRails II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled

Slots

2 x PCle 3.0: PCle Slot-1: PCle x8 connector with x4 bandwidth, half-length, half-height
PCle Slot-2: PCle x16 connector with x8 bandwidth, half-length, full-height

6 PCIe 3.0 slots, 4 with x16 bandwidth and 2 with x8 bandwidth

3 PCIe 3.0 slots, 2 with x16 bandwidth and 1 with x8 bandwidth; all slots are low profile

The following applies to all NX Series configurations:

Management

Dell OpenManage™ featuring Dell Management Console, iDRAC8 Enterprise, Native Java RDP plug-in or Windows Server Management interface

Data Protection Features

DFS-R (Replication), VSS (Snapshots)

Data Management Features

Data deduplication with compression, FCI (File Classification Infrastructure), FSRM (File Server Resource Manager)

Close

NX3230

Effectively manages both file and block data with advanced software for efficient, adaptable data sharing

Close

NX3230

  • Windows NAS appliances
  • Automated setup and management capabilities
  • Manages both file and block data for adaptable data sharing
  • Cluster-ready high availability failover storage solution

small-Intel-Xeon-logo-e1442270250630

Tech Specs
Feature Description
Storage 12 x 3.5" SAS + 2 x 2.5" NL-SAS
Maximum internal capacity 120TB raw capacity with 10TB NL-SAS
Types of data File and block (Microsoft iSCSI target)
Processor Intel Xeon E5-2609 v3 1.9GHz, 15M Cache, 85W or Intel Xeon E5-2630 v3 2.4GHz, 20M Cache, 85W
Product configurationsNX430NX3230NX3330

Storage

4 x 3.5” internal drives that must be identical in capacity and type (NL-SAS or SATA)

Up to 12 x 3.5” drives

Up to 4 x 2.5” SAS drives

Maximum internal capacity

40TB raw capacity with 10TB NL-SAS drives

120TB raw capacity using 10TB drives

Leverages shared storage arrays attached via SAS, iSCSI or FC

Types of data

File and Block (Microsoft iSCSI target)

File and Block (Microsoft iSCSI target)

File and Block

Drive capacities

SATA (7.2K): 1TB, 2TB, 4TB, 6TB, 8TB
NL-SAS (7.2K): 1TB, 2TB, 3TB, 4TB, 6TB, 8TB, 10TB

SATA (7.2K): 2TB, 4TB
NL-SAS (7.2K): 1TB, 2TB, 4TB, 6TB, 8TB, 10TB
SAS (10K): 600GB, 1.2TB
SAS (15K): 600GB

Leverages shared storage arrays attached via SAS, iSCSI or FC

External expansion

PowerVault MD RBODs and MD JBODs (JBODs require PERC or OS level RAID)

PowerVault, EqualLogic and Compellent controllers and arrays

Gateway to PowerVault MD3, EqualLogic or Compellent

Form factor

1U rack mount system

2U rack mount system

1U rack mount system

Processor

Intel® Xeon® processor E3-1220 v5

Intel Xeon E5-2609 v3 1.9GHz, 15M Cache, 85W or Intel Xeon E5-2630 v3 2.4GHz, 20M Cache, 85W

Intel Xeon E5-2609 v3 1.9GHz, 15M Cache, 85W or Intel Xeon E5-2630 v3 2.4GHz, 20M Cache, 85W

File access protocols

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

Block access protocols

Microsoft iSCSI target

Microsoft iSCSI target

Leverages shared storage back end for block access or Microsoft iSCSI Target

OS supported

Microsoft Windows Storage Server 2016 (Standard and Workgroup Editions)

Microsoft Windows Storage Server 2016 (Standard Edition)

Microsoft Windows Storage Server 2016 (Standard Edition)

Standard RAID options

RAID 5

OS HDDs (on rear 2.5” HDDs) are always RAID1. Data HDDs can be configured from factory in RAID5 or RAID6 (minimum 4 HDDs). The internal PERC can support additional customer configurable RAID options.

2 HDDs for OS (RAID 1) or 4 HDD for OS (RAID 5) with PERC H310

Custom RAID options

0, 1, 5, 6 and 10 with the PowerEdge Raid Controller (PERC) H730

As supported by internal PERC H730 (RAID 0, 1, 5, 6, 10, 50, 60)

n/a

RAID controller

PERC H730 (internal drives) or H830 (optional for external drives)

PERC H730 (internal HDDs)

PERC H330

AC power/maximum current

Redundant, 350W

Redundant and non-redundant hot-plug 750W and 1100W PSU options

Redundant and non-redundant hot-plug 750W PSU options

Dimensions

Height: 4.28 cm (1.68 in)
Width: 48.2 cm (19.98 in)
Depth with rack latches: 48.24 cm (18.99 in); depth without rack latches: 43.4 cm (17.08 in)
Max weight: 13.8 kg (30.42 lb)

Height: 8.73 cm (3.44 in)
Width: 44.40 cm (17.49 in)
Depth (excludes bezel): 68.40 cm (26.92 in)
Max weight: 27.6kg (60.84lb)

Height: 4.28 cm (1.68 in)
Width: 48.2 cm (19.98 in)
Depth (excludes bezel): 70.05 cm (27.57 in)
Max weight: 16.9kg (37lbs)

Availability

Hot-plug hard drives, hot-plug power

Hot-plug hard drives, hot-plug redundant power, hot-plug redundant cooling ECC memory

Hot-plug hard drives, hot-plug redundant power, hot-plug redundant cooling ECC memory

Cluster support

Not recommended

No

Yes, up to 64 nodes

Rack support

ReadyRails™ sliding rails with optional cable management arm for 4-post racks (optional adapter brackets required for threaded hole racks)

ReadyRails II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional toolless cable management arm

ReadyRails II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled

Slots

2 x PCle 3.0: PCle Slot-1: PCle x8 connector with x4 bandwidth, half-length, half-height
PCle Slot-2: PCle x16 connector with x8 bandwidth, half-length, full-height

6 PCIe 3.0 slots, 4 with x16 bandwidth and 2 with x8 bandwidth

3 PCIe 3.0 slots, 2 with x16 bandwidth and 1 with x8 bandwidth; all slots are low profile

The following applies to all NX Series configurations:

Management

Dell OpenManage™ featuring Dell Management Console, iDRAC8 Enterprise, Native Java RDP plug-in or Windows Server Management interface

Data Protection Features

DFS-R (Replication), VSS (Snapshots)

Data Management Features

Data deduplication with compression, FCI (File Classification Infrastructure), FSRM (File Server Resource Manager)

Close

NX3330

Cluster-ready NAS offers efficient deployment and integration with high availability to simplify data management

Close

NX3330

  • Windows NAS appliances
  • Automated setup and management capabilities
  • Manages both file and block data for adaptable data sharing
  • Cluster-ready high availability failover storage solution

small-Intel-Xeon-logo-e1442270250630

Tech Specs
Feature Description
Storage 4 x 2.5" 10K SAS
Maximum internal capacity Leverages shared storage arrays attached via SAS, iSCSI or FC
Types of data File and block
Processor Intel Xeon E5-2609 v3 1.9GHz, 15M Cache, 85W or Intel Xeon E5-2630 v3 2.4GHz, 20M Cache, 85W
Product configurationsNX430NX3230NX3330

Storage

4 x 3.5” internal drives that must be identical in capacity and type (NL-SAS or SATA)

Up to 12 x 3.5” drives

Up to 4 x 2.5” SAS drives

Maximum internal capacity

40TB raw capacity with 10TB NL-SAS drives

120TB raw capacity using 10TB drives

Leverages shared storage arrays attached via SAS, iSCSI or FC

Types of data

File and Block (Microsoft iSCSI target)

File and Block (Microsoft iSCSI target)

File and Block

Drive capacities

SATA (7.2K): 1TB, 2TB, 4TB, 6TB, 8TB
NL-SAS (7.2K): 1TB, 2TB, 3TB, 4TB, 6TB, 8TB, 10TB

SATA (7.2K): 2TB, 4TB
NL-SAS (7.2K): 1TB, 2TB, 4TB, 6TB, 8TB, 10TB
SAS (10K): 600GB, 1.2TB
SAS (15K): 600GB

Leverages shared storage arrays attached via SAS, iSCSI or FC

External expansion

PowerVault MD RBODs and MD JBODs (JBODs require PERC or OS level RAID)

PowerVault, EqualLogic and Compellent controllers and arrays

Gateway to PowerVault MD3, EqualLogic or Compellent

Form factor

1U rack mount system

2U rack mount system

1U rack mount system

Processor

Intel® Xeon® processor E3-1220 v5

Intel Xeon E5-2609 v3 1.9GHz, 15M Cache, 85W or Intel Xeon E5-2630 v3 2.4GHz, 20M Cache, 85W

Intel Xeon E5-2609 v3 1.9GHz, 15M Cache, 85W or Intel Xeon E5-2630 v3 2.4GHz, 20M Cache, 85W

File access protocols

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

CIFS, NFS, FTP, SMB3.0, SMB Direct (RDMA)

Block access protocols

Microsoft iSCSI target

Microsoft iSCSI target

Leverages shared storage back end for block access or Microsoft iSCSI Target

OS supported

Microsoft Windows Storage Server 2016 (Standard and Workgroup Editions)

Microsoft Windows Storage Server 2016 (Standard Edition)

Microsoft Windows Storage Server 2016 (Standard Edition)

Standard RAID options

RAID 5

OS HDDs (on rear 2.5” HDDs) are always RAID1. Data HDDs can be configured from factory in RAID5 or RAID6 (minimum 4 HDDs). The internal PERC can support additional customer configurable RAID options.

2 HDDs for OS (RAID 1) or 4 HDD for OS (RAID 5) with PERC H310

Custom RAID options

0, 1, 5, 6 and 10 with the PowerEdge Raid Controller (PERC) H730

As supported by internal PERC H730 (RAID 0, 1, 5, 6, 10, 50, 60)

n/a

RAID controller

PERC H730 (internal drives) or H830 (optional for external drives)

PERC H730 (internal HDDs)

PERC H330

AC power/maximum current

Redundant, 350W

Redundant and non-redundant hot-plug 750W and 1100W PSU options

Redundant and non-redundant hot-plug 750W PSU options

Dimensions

Height: 4.28 cm (1.68 in)
Width: 48.2 cm (19.98 in)
Depth with rack latches: 48.24 cm (18.99 in); depth without rack latches: 43.4 cm (17.08 in)
Max weight: 13.8 kg (30.42 lb)

Height: 8.73 cm (3.44 in)
Width: 44.40 cm (17.49 in)
Depth (excludes bezel): 68.40 cm (26.92 in)
Max weight: 27.6kg (60.84lb)

Height: 4.28 cm (1.68 in)
Width: 48.2 cm (19.98 in)
Depth (excludes bezel): 70.05 cm (27.57 in)
Max weight: 16.9kg (37lbs)

Availability

Hot-plug hard drives, hot-plug power

Hot-plug hard drives, hot-plug redundant power, hot-plug redundant cooling ECC memory

Hot-plug hard drives, hot-plug redundant power, hot-plug redundant cooling ECC memory

Cluster support

Not recommended

No

Yes, up to 64 nodes

Rack support

ReadyRails™ sliding rails with optional cable management arm for 4-post racks (optional adapter brackets required for threaded hole racks)

ReadyRails II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional toolless cable management arm

ReadyRails II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled

Slots

2 x PCle 3.0: PCle Slot-1: PCle x8 connector with x4 bandwidth, half-length, half-height
PCle Slot-2: PCle x16 connector with x8 bandwidth, half-length, full-height

6 PCIe 3.0 slots, 4 with x16 bandwidth and 2 with x8 bandwidth

3 PCIe 3.0 slots, 2 with x16 bandwidth and 1 with x8 bandwidth; all slots are low profile

The following applies to all NX Series configurations:

Management

Dell OpenManage™ featuring Dell Management Console, iDRAC8 Enterprise, Native Java RDP plug-in or Windows Server Management interface

Data Protection Features

DFS-R (Replication), VSS (Snapshots)

Data Management Features

Data deduplication with compression, FCI (File Classification Infrastructure), FSRM (File Server Resource Manager)

Close

Would You Like More Information?

Click the envelope icon at any time to use our contact form to have a Dell EMC representative get in touch with you, or click Contact Me now.

Contact Me No Thanks